{"product_id":"the-gables-series-nerdqaxe-4-8-th-s","title":"THE GABLES SERIES — NerdQaxe++ 4.8 TH\/s","description":"\u003cp\u003eThe NerdQaxe++ is where serious home mining begins. Powered by four BM1370 ASIC chips — the same chips found inside Bitmain's Antminer S21 Pro — it delivers 4.8 TH\/s at default settings with an efficiency of approximately 15.6 J\/TH. It draws just 75 watts, fits on any desk, and runs nearly silent.\u003c\/p\u003e\n\u003cp\u003eThe NerdQaxe++ runs NerdAxe firmware with a built-in TFT display showing live hashrate, ASIC temperature, pool connection, and best difficulty found. Browser-based dashboard via AxeOS gives you full control over frequency, voltage, and fan curves.\u003c\/p\u003e\n\u003cp\u003eNerdQaxe++ units have found real Bitcoin blocks. Block 913,272 was found by a NerdQaxe++ in September 2025. This is not simulated mining — this is real SHA-256 hashing on the real Bitcoin network.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecs:\u003c\/strong\u003e\u003cbr\u003e\nASIC Chip: 4x BM1370 (Antminer S21 Pro)\u003cbr\u003e\nHashrate: 4.8 TH\/s (default) \/ up to 6+ TH\/s overclocked\u003cbr\u003e\nPower Consumption: ~75W (default) \/ ~103W overclocked\u003cbr\u003e\nEfficiency: ~15.6 J\/TH\u003cbr\u003e\nConnectivity: 2.4 GHz Wi-Fi\u003cbr\u003e\nFirmware: AxeOS \/ NerdAxe\u003cbr\u003e\nDisplay: TFT color screen (real-time stats)\u003cbr\u003e\nPower Input: 12V DC \/ min 8A (10A recommended)\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eSETUP GUIDE — NerdQaxe++\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat You Need:\u003c\/strong\u003e\u003cbr\u003e\n12V DC power supply (10A recommended, included)\u003cbr\u003e\n2.4 GHz Wi-Fi network\u003cbr\u003e\nBitcoin on-chain wallet address\u003cbr\u003e\nComputer or phone browser\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStep 1 — Power On\u003c\/strong\u003e\u003cbr\u003e\nConnect the 12V power supply. The TFT display will light up and show boot status.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStep 2 — Connect to Wi-Fi Hotspot\u003c\/strong\u003e\u003cbr\u003e\nOn your phone or computer, connect to the Wi-Fi network broadcast by the device — it will appear as \"NerdQaxe\" or \"AxeOS\".\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStep 3 — Open Setup Page\u003c\/strong\u003e\u003cbr\u003e\nIn your browser go to: http:\/\/192.168.4.1\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStep 4 — Enter Home Wi-Fi Credentials\u003c\/strong\u003e\u003cbr\u003e\nType your home Wi-Fi name and password. Save and allow the device to reboot.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStep 5 — Find Device on Your Network\u003c\/strong\u003e\u003cbr\u003e\nAfter reboot, the TFT screen will display the local IP address. Type that IP into your browser (example: http:\/\/192.168.1.110).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStep 6 — Configure Mining Pool\u003c\/strong\u003e\u003cbr\u003e\nIn Settings, enter your pool:\u003cbr\u003e\nSolo CKPool: solo.ckpool.org:3333\u003cbr\u003e\nPublic Pool: public-pool.io:21496\u003cbr\u003e\nOcean Mining (DATUM): Advanced users — requires own node\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStep 7 — Enter Bitcoin Address\u003c\/strong\u003e\u003cbr\u003e\nIn the Stratum User field, enter your Bitcoin on-chain wallet address.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStep 8 — Save and Mine\u003c\/strong\u003e\u003cbr\u003e\nClick Save. The device reboots and begins hashing. Your TFT screen will show live hashrate and share count.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eTemperature Guidelines:\u003c\/strong\u003e\u003cbr\u003e\nASIC: Target under 65°C at stock. Under 60°C preferred.\u003cbr\u003e\nVRM: Target under 55°C.\u003c\/p\u003e\n\u003cp\u003eIf temps exceed limits, reduce frequency or improve airflow.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eOverclocking (Advanced):\u003c\/strong\u003e\u003cbr\u003e\nIn AxeOS Settings \u0026gt; Mining Settings, raise frequency in 25–50 MHz increments. Save after each change and monitor temps for 15 minutes before increasing further. Most NerdQaxe++ units run stable at 700–750 MHz.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty \u0026amp; Shipping:\u003c\/strong\u003e\u003cbr\u003e\n60-day warranty against manufacturing defects — we repair or replace, no hassle.\u003cbr\u003e\nOrders ship within 3 business days.\u003cbr\u003e\n30-day returns accepted on unused units in original condition.\u003c\/p\u003e","brand":"Miami Bitcoin Nerd Miner.925 Lab","offers":[{"title":"Default Title","offer_id":51975863402776,"sku":"GBL-NQ-48","price":280.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0980\/0967\/8104\/files\/WhatsAppImage2026-06-24at10.27.38_4.jpg?v=1782314902","url":"https:\/\/miamibitcoinnerdminer.com\/products\/the-gables-series-nerdqaxe-4-8-th-s","provider":"Miami Bitcoin Nerd Miner.925 Lab","version":"1.0","type":"link"}